Rous Head Cargo Services
- 4 alternative frames designed to ensure cost effectiveness.
- 3 alternative slabs designed to ensure cost effectiveness.
- Reviewed and implemented alternate civil pavement system to reduce pavement depths from 1.2m to 0.6m.
- 109T front axle load reach stackers.
- 250T washdown pad.
- AQIS quarantine design requirements.
Rous Head Sub Area A is a commercial sea container terminal facility developed on reclaimed land located at the Fremantle Port. The development contains over 5.2ha of external pavements that can cater for 109 tonne reach stacker point loads and 6 containers stacked vertically.
Pritchard Francis investigated options to reduce project costs such as:
- Ground improvement methods
- Alternative pavement materials
- 4 alternative steelwork frame solutions
- 3 alternative slab solutions
- 3 corrosion protection solutions
The project incorporated:
- 5.2ha heavy pavement site
- 1,000m2 - 350T washdown pad to cater for tracked vehicles
- Water and contamination compounds
- 2 storey office
- 2x 2,000m2 warehouses for racking and side tippers.
- Fire tanks and pumps and other smaller services
- 50T dual lift external gantry crane
The pavement design was critical for the project success, due to the existing low soil bearing pressures alternate solutions were investigated. The use of recycled aggregates in the construction of the pavement provided a stronger, alternative to traditional road base products and offered savings in time by eliminating cement improvement methods.
As the 5.2ha of pavements were to be traversed by large (109T) reach stackers, the proposed pavement formation had to be suitable to withstand this load. In conjunction with the geotechnical engineers, a suitable pavement formation was designed.